|
Used Equipment | New Equipment
financing available at very competitive rates. approvals in less than 24 hours!
UPDATED 2/4/12 SCROLL DOWN FOR COMPLETE LIST!
Unless otherwise noted, each machine is completely serviced and in ready to work condition before it leaves our shop. A complete record of specific repairs and any additional pictures you may wish to see are available upon request.
Call Matt or Steve at 630/663-1400 for more information!
We Buy Used Equipment - No purchase necessary! Call for info.
| Year |
Make & Model |
Engine |
Condition |
Price
($) |
|
| 2008 |
Morbark 18 |
140HP John Deere |
One Year chipper and engine warranty! Reversing auto-feed, hydraulic swivel discharge chute and hydraulic jack stand. Only 1,000 hours. Complete service record available! |
Only $39,900!! |
.jpg)
|
| 2006 |
Morbark 18 |
180HP Cat Turbo |
Great project machine! 180HP Cat turbo is locked up. Also needs new axles and standard service. Includes winch, reversing auto-feed & hydraulic jack stand. Scheduled for service next month but available now as-is. |
$19,900 as-is or $32,900 fully repaired |
|
| 2004 |
Vermeer BC1800XL |
125HP John Deere Turbo |
Great condition with winch and new drum, shaft & bearings. Re-painted in late 2011. Price includes new decals installed. Fully serviced & ready to work now! |
$26,900 |
|
| 2001 |
Morbark 2400XL |
125HP John Deere Turbo |
Includes auto-feed, tandem axle trailer, hydraulic jack stand and feed wheel speed control valve. Scheduled for full servicing including new clutch, control bar, discharge deflector and more. Pictures taken before servicing. |
$20,900 or $22,900 painted to your color |
|
| 2000 |
Morbark 2400XL |
200HP Cummins |
Tandem axle trailer with hydraulic jack stand. Price includes full service including new chipper bearings, control bar, discharge deflector, guages, and more. Pictures taken before repairs made. |
$22,900 or $24,900 painted to your color |
.jpg)
|
| 1999 |
Morbark 2400 |
115HP John Deere Turbo |
Village trade-in with tandem axles, hydraulic jack stand and auto-feed. Price includes full servicing before sale. |
$17,900 |
|
| 1998 |
Morbark 2400 |
200HP Cummins |
Tandem axle trailer, hydraulic jack, 1/2" thick reinforced in-feed & dual horizontal feed rollers. Great power at a very affordable price! |
$19,900 |
|
| 1998 |
Morbark 2400 Brush Chipper |
110HP John Deere Turbo |
Clean & affordably priced 18" chipper with dual feed rollers, hydraulic feed wheel lift and speed control valve. Pictures taken before servicing. Repairs to include new control bar & discharge chute deflector as well as complete bearing, clutch & hydraulic inspection with any necessary repairs completed. Can be painted to your color at additional cost. |
$15,900 or $17,900 painted to your color |
.jpg)
|
| 1996 |
Morbark 2400 |
110HP John Deere Turbo |
Another great project machine! Currently runs and chips but engine is blowing oil thru breather. Available as-is before reconditioning begins next month.
Scheduled for complete service including engine rebuild, clutch work, gauge replacements, bearing & hydraulic system service, etc. |
$6,900 as-is or $14,900 with scheduled repairs. |
|
| Year |
Make & Model |
Engine |
Condition |
Price
($) |
|
| 2002 |
Morbark 13 |
125HP John Deere Turbo |
Aggressive 15" capacity chipper. Fully serviced and ready to chip now. Repairs included new chipper bearings, injection pump, control bar, electrical updates and complete hydraulic check. |
$17,900 or $19,900 painted to your color |
|
| 2002 |
Morbark 13 Brush Chipper |
115HP John Deere Turbo |
Nice Village trade-in with auto-feed and feed wheel speed control valve. Fully serviced and ready to work! Paint poor but unit is very clean and in excellent condition. |
$17,900 or $19,900 with paint & decals |
|
|
What is a Sandvik Cutter Wheel? Most of our new Carlton grinders are equipped with the Sandvik Cutter Wheel. Customer reports have shown this wheel increases production by as much as 30% by allowing a much bigger cut to be taken each pass. Tooth wear is also greatly reduced and clean-up is simplified by producing a remarkably small chip that compacts extremely well. View photo here.
|
| Year |
Make & Model |
Engine |
Condition |
Price
($) |
|
| 2011 |
Carlton 8018TRX |
99HP Kubota Turbo |
Outstanding condition with less than 100 hours! Sandvik cutter wheel, hydraulic scraper blade, wireless remote, 4-speed drive system and tremendous power. Includes warranty. |
$52,400 |
.jpg)
|
| 2010 |
Carlton 4012 (Lever Controls) |
44HP Kubota Turbo Diesel |
Demo unit with full warranty. 4WD, hydraulic plow, Sandvik cutter wheel & great power! |
$24,900 (Compare to new at $32,500!) |
|
| 2010 |
Carlton 4012 (Wireless remote) |
44HP Kubota Turbo |
Demo unit with full warranty. 4WD, hydraulic plow, Sandvik cutter wheel, wireless remote control & great power! |
$27,900 (Compare to new at $36,500!) |
|
| 2008 |
Carlton 4012 |
27HP Kohler gas |
Includes Sandvik cutter wheel and 2-speed drive system. One year warranty!
|
$13,900 |
|
| 2005 |
Carlton 4012 |
NEW 31HP Vanguard Gas |
Excellent condition with new 31HP Vanguard engine installed this year. 2 speed drive system provides fast travel speeds. Excellent condition with engine warranty. |
$12,900 |
|
|
